| মডেল নম্বার | বৈদ্যুতিক ইস্পাত খুঁটি |
|---|---|
| উপাদান | Q345, Q235.GR65 |
| সারফেস ট্রিটমেন্ট | হট ডিপ গ্যালভানাইজেশন (ASTM A123) |
| উপাদান দৈর্ঘ্য | -25 মিমি থেকে 75 মিমি |
| রেটেড ভোল্টেজ | 69KV-550KV |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| প্রকার | সোজা মেরু, প্রসার্য মেরু, পাল মেরু |
|---|---|
| বাতাসের গতি | 160 কিলোমিটার / ঘ, 30 মি / সেকেন্ড |
| শক্তি | 10kV ~ 550kv |
| ডিমেরেন্সের টরলান্স | - ২% |
| উপযুক্ত | বিদ্যুৎ বিতরণ |
| Style | hot dip galvanized |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Surface Treatment | hot dip galvanized |
| Design Load in kg | 300~1000kg applicated to 50cm from the top pole |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Joint of the poles | insert mode, innerflange mode, face to face joint mode |
| Suit For | electricity distribution |
| Safety Factor | 1.0-2.0 |
| Surface treatment | hot dip galvanization |