বার্তা পাঠান
বাড়ি পণ্যইস্পাত ইউটিলিটি মেরু

12m 10.7KN Galvanised Steel Poles Transmission Line Project Electric Power Poles

সাক্ষ্যদান
চীন Jiangsu milky way steel poles co.,ltd সার্টিফিকেশন
চীন Jiangsu milky way steel poles co.,ltd সার্টিফিকেশন
Dear Sirs, Hereby we confirm that JiangSu MilkyWay steel poles co., ltd is our partner for several years. Since that time this company has shown itself as reliable supplier of qualitative products.We also would like to note that they provide top level service and all kinds of support.We plan to continue our fruitful cooperation co-operation for many years more.

—— Abacus

We do hereby certify the 69 KV transmmision line steel pole(from 25ft to 90 ft ) manufacuterd by Jiangsu Milky Way Steel Poles Co., Ltd since 2010.We are satisfied with their quality,service and the ways and attention they showed toward our order.

—— National Electricity Company

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন

12m 10.7KN Galvanised Steel Poles Transmission Line Project Electric Power Poles

চীন 12m 10.7KN Galvanised Steel Poles Transmission Line Project Electric Power Poles সরবরাহকারী

বড় ইমেজ :  12m 10.7KN Galvanised Steel Poles Transmission Line Project Electric Power Poles

পণ্যের বিবরণ:

Place of Origin: China
পরিচিতিমুলক নাম: Milky Way
সাক্ষ্যদান: ISO, BV,
Model Number: 12m 10.7KN Electrical Steel Utility Pole For Transmission Line Project

প্রদান:

Minimum Order Quantity: one 40 HQ
মূল্য: negotiation
Packaging Details: as per customer request
Delivery Time: usually 2 weeks after confirming
Payment Terms: T/T
Supply Ability: 300 pieces pole per day
যোগাযোগ
বিস্তারিত পণ্যের বর্ণনা
Style: galvanized Torlance of dimenstion: +-2%
Thickness: 1mm to 30mm Wind speed: 160km/h, 30m/s
Suit for: electricity distribution Length of per section: within 14m once forming without slip joint
লক্ষণীয় করা:

metal utility poles

,

electric telescoping pole

12m 10.7KN Electrical Steel Utility Pole For Transmission Line Project

 

 

Introduction

 

Available height

5-80m

Electric pressure

10kv--550kv

Material

Q345B/A572,minimum yield   strength>=345MPA,
Q235B/A36,minimum yield strength>=235MPA

Galvanized

Hot dip galvanization,thickness   is>=12um

Delivery lead time

30 days after receiving 30% deposit

Lifetime

Minimum 25 years

Structure

Overlap connection/Flange connection

Galvanizing standard

EN ISO 146,ASTM/A123

Manufacturing and workmanship

BS449 or AISC

Welding standard

BSEN287,BSEN288 or equivalent

 

 

 

 

 

Specification

 

1. ISO9001:2008 Certificate 
2. 20 years experience 
3. Material Q235,Q345 ASTM
4. Hot dip galvanized

5. OEM is welcome.

6. Best quality with reasonable price!

7. The voltage grade is 500kV.

8. The monthly production capacity is 3000 Metric tons.

9. The largest company of eastern region in China to design and  manufacture the steel tower pole and related products.

10. A strong teemwork of tecknological reserch and advanced progress.
11. Mainly exports to southeast Asia, Middle East and other countries and regions.

 

 

 

Scope of Application

 

The product is mainly use in small power transmission line, which suitable for Small whole, ceiling-mounted steel pole tower installation transmission line project; Generally it only applies to erect on the flat terrain such as plain and side of the road, and much rely on heavy lifting machines for installation.

 

Straight Pole is mainly use to the “straight” part of the power line, it usually only bear with the weight of the wire, the endured wire icing and wind pressure.

 

Tension pole is mainly use in Load-bearing towers; it would be set between few Straight towers. Since the power line discounted and tower collapsed, it would limit the fault segment between the two Tension towers in the case of tension imbalance on both sides, which ease of construction, maintenance.

 

Angle Pole is mainly installed in the around corner of the power line, so the structure of it has to consider the requirement of undertake imbalance tension; According to the angle degree and strength of tower design, straight line angle tower is mainly use in the small degree corner of the power line, and Tension Angle Tower is mainly used for larger degree corner of the power line.

 

Terminal Pole is mainly use in the beginning or end of the power transmission line, it usually set as the first tower of extension line of substation; because it could undertake great imbalance tension, so sometime it also use in the large degree of power line corner.

 

12m 10.7KN Galvanised Steel Poles Transmission Line Project Electric Power Poles 0

 

 

যোগাযোগের ঠিকানা
Jiangsu milky way steel poles co.,ltd

ব্যক্তি যোগাযোগ: Bella

টেল: +8618206191880

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)

অন্যান্য পণ্যসমূহ
বৈদ্যুতিক শক্তি মেরু

Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape

হেডলাইন প্রকল্পের জন্য হট ডিপ galvanization বৈদ্যুতিক শক্তি মেরু

Conical 3.5mm thickness electric power pole 22m height with three sections for transmission

3mm Thickness NGCP Electrical Power Pole For Electricity Distribution

ইস্পাত শক্তি মেরু

Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution

Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment

Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line

Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project

ইস্পাত মেরু

11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment

12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles

12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting

Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv

উদ্ধৃতির জন্য আবেদন

E-Mail | সাইট ম্যাপ

গোপনীয়তা নীতি | চীন ভাল গুণ ইস্পাত শক্তি মেরু সরবরাহকারী. © 2015 - 2023 steelpowerpole.com. All Rights Reserved.